VACUUM FORMING(RVAC)

Description:
RVAC is Rigid PVC film engineered for use in Vacuum forming . It can be used for blister packaging in products such as hardware, toys , VCR tapes and electronic parts .

Features:
Excellent chemical resistance
Excellent clarity and gloss
Excellent die cutting
Excellent dimensional stability
Excellent impact resistance
Very light flow mark

 
PHYSICAL PROPERTIES  UNIT TEST METHOD  TYPICAL VALUES
Thickness mm RPC-001 0.05~1.0
Color   RPC-006 Transparent
Gloss Value   ASTM D523 at 60° 140/80 min.
Contamination  pc/m2 RPC-012 3 max.
Specific Gravity g/cm3 ASTM D792 1.35±0.05
Tensile Strength psi ASTM D882 6000min.
Elongation % ASTM D882 80min.
Heat Shrinkage % ASTM D1204 at 150 X10’ 0.25↓: CD+2.5,MD-2~-15
0.26~0.40: CD+2.0,MD-2~-10
0.41↑: CD+1.5,MD-2~-8
Thickness Tolerance  % RPC-001 0.20↓: ±7, 0.21~0.50 : ±5, 0.51↑: ±3
Width Tolerance  mm RPC-001 ±2(roll),±1(square cut)
Impact Strength      Genenal Impact/Middle Impact
/High Impact/Very High Impact
Heat Distortion Temp. ASTM D648 68±2
Low Temp.Impact ASTM D1790 -10,  -20,  -30, -40
Dart Drop Impact in-lb/mil. ASTM D5420 1.5   2.0   3.0   4.0 
Izod Impact ft-1b/in of notch 1/8" ASTM D256 1.2   3.0   8.0   12.0